Airbag suspension for LAND ROVER DEFENDER 110 Wagon 90-16
Can't find what you are looking for? Click here to let us know.
Build an Air Control Kit
Airbag Man has a broad range of on-board air solutions for every application.
To build your Modular Air Control Kit, please Click here.
Filters
Height
Position
Fitment time
Availability
-
OA6015
Full Air Suspension KitProduct/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, Contact for further info. No offset Front shock tower
- Standard to 50mm Raised, incl. Shock relocation mounts, Compatible with standard Air Control kits, excl. Intelliride, Long travel shock options available, contact Airbag Man for further details
Fitment Position: Front Axle
Fitment Time: 180 minutes
NZD$1,715Shipping & installation not included
-
OA6015M
Full Air Suspension Kit - Metric TubingProduct/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, No offset Front shock tower, Metric Tubing Option
- Standard to 50mm raised front, incl. Shock relocation mounts, Long travel shock options available, Compatible with Intelliride control systems, Contact Airbag Man for further details
Fitment Position: Front Axle
Fitment Time: 180 minutes
NZD$1,715Shipping & installation not included
-
OA6515M
Full Air Suspension Kit - Metric TubingProduct/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, Metric Tubing Option
- Coil springs replaced with sleeve style airbags to allow full height adjustment, IntelliRide on-board 4 corner air controls included.
Fitment Position: Front and Rear
Fitment Time: Contact Airbag Man to confirm
NZD$7,888Shipping & installation not included
-
CR5028
Air Suspension Helper Kit for Coil SpringsProduct/Vehicle Details:
- Easy Fit Kit
Fitment Position: Rear Axle
Fitment Time: 120 minutes
NZD$463Shipping & installation not included
-
CR5028HP
Air Suspension Helper Kit for Coil Springs - High PressureProduct/Vehicle Details:
- Easy Fit Kit
- High Pressure Kit
Fitment Position: Rear Axle
Fitment Time: 120 minutes
NZD$549Shipping & installation not included
-
OA4515
Full Air Suspension KitProduct/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, 110 & 130 Only
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
Fitment Position: Rear Axle
Fitment Time: 120 minutes
NZD$1,687Shipping & installation not included
-
OA4515M
Full Air Suspension Kit - Metric TubingProduct/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, 110 or 130 Only, Metric Tubing Option
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
Fitment Position: Rear Axle
Fitment Time: 120 minutes
NZD$1,687Shipping & installation not included
-
OA6015
Full Air Suspension KitProduct/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, Contact for further info. No offset Front shock tower
- Standard to 50mm Raised, incl. Shock relocation mounts, Compatible with standard Air Control kits, excl. Intelliride, Long travel shock options available, contact Airbag Man for further details
Fitment Position: Front Axle
Fitment Time: 180 minutes
NZD$1,715Shipping & installation not included
-
OA6015M
Full Air Suspension Kit - Metric TubingProduct/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, No offset Front shock tower, Metric Tubing Option
- Standard to 50mm raised front, incl. Shock relocation mounts, Long travel shock options available, Compatible with Intelliride control systems, Contact Airbag Man for further details
Fitment Position: Front Axle
Fitment Time: 180 minutes
NZD$1,715Shipping & installation not included
-
SAF570360
Airbag Man Front Shock AbsorberProduct/Vehicle Details:
- Sold as a pair
- Suitable for a 50mm lift
- Suits Airbag Man shock mounting position
Fitment Position: Front Axle
Fitment Time: 90 minutes
NZD$1,698Shipping & installation not included
-
OA6515M
Full Air Suspension Kit - Metric TubingProduct/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, Metric Tubing Option
- Coil springs replaced with sleeve style airbags to allow full height adjustment, IntelliRide on-board 4 corner air controls included.
Fitment Position: Front and Rear
Fitment Time: Contact Airbag Man to confirm
NZD$7,888Shipping & installation not included
-
CR5028
Air Suspension Helper Kit for Coil SpringsProduct/Vehicle Details:
- Rear Height Measurement up to 170mm, see note for measuring information
- To check height measure from bottom of bump stop to axle housing, then choose the matching kit - jack car up before measuring if it is lower than desired, for more information contact Airbag Man.
- Easy Fit Kit
- Use kit for Hub to Guard measurement (where possible), up to 570mm at driving height
Fitment Position: Rear Axle
Fitment Time: 120 minutes
NZD$463Shipping & installation not included
-
CR5028HP
Air Suspension Helper Kit for Coil Springs - High PressureProduct/Vehicle Details:
- Rear Height Measurement up to 170mm, see note for measuring information
- To check height measure from bottom of bump stop to axle housing, then choose the matching kit - jack car up before measuring if it is lower than desired, for more information contact Airbag Man.
- Easy Fit Kit
- High Pressure Kit, use kit for Hub to Guard measurement (where possible), up to 570mm at driving height
Fitment Position: Rear Axle
Fitment Time: 120 minutes
NZD$549Shipping & installation not included
-
CR5157
Air Suspension Helper Kit for Coil SpringsProduct/Vehicle Details:
- Rear Height Measurement 195mm or more, see note for measuring information
- To check height measure from bottom of bump stop to axle housing, then choose the matching kit - jack car up before measuring if it is lower than desired, for more information contact Airbag Man.
- Easy Fit Kit
- Use kit for Hub to Guard measurement (where possible), of 595mm or more at driving height
Fitment Position: Rear Axle
Fitment Time: 120 minutes
NZD$463Shipping & installation not included
-
CR5157HP
Air Suspension Helper Kit for Coil Springs - High PressureProduct/Vehicle Details:
- Rear Height Measurement 195mm or more, see note for measuring information
- To check height measure from bottom of bump stop to axle housing, then choose the matching kit - jack car up before measuring if it is lower than desired, for more information contact Airbag Man.
- Easy Fit Kit
- High Pressure Kit, use kit for Hub to Guard measurement (where possible), of 595mm or more at driving height
Fitment Position: Rear Axle
Fitment Time: 120 minutes
NZD$549Shipping & installation not included
-
OA4515
Full Air Suspension KitProduct/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- Use with 0-50mm Raised Front springs or airbags, 110 or 130 Only
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
Fitment Position: Rear Axle
Fitment Time: 120 minutes
NZD$1,687Shipping & installation not included
-
OA4515M
Full Air Suspension Kit - Metric TubingProduct/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- Use with 0-50mm Raised Front springs or airbags, 110 or 130 Only, Metric Tubing Option
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended. Note that this kit will lift the rear height slightly above standard, or maintain standard height to match a lifted front end.
Fitment Position: Rear Axle
Fitment Time: 120 minutes
NZD$1,687Shipping & installation not included
