CR5028
Air Suspension Helper Kit for Coil Springs
Product/Vehicle Details:
- Easy Fit Kit
- Inner coil needs to be removed on 130's
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Easy Fit Kit
- Inner coil needs to be removed on 130's
CR5028HP
Air Suspension Helper Kit for Coil Springs- High Pressure
Product/Vehicle Details:
- Easy Fit Kit
- High Pressure Kit
- Inner coil needs to be removed on 130's
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Easy Fit Kit
- High Pressure Kit
- Inner coil needs to be removed on 130's
OA4515
Full Air Suspension Kit
Product/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, 110 or 130 Only
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, 110 or 130 Only
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
OA4515M
Full Air Suspension Kit- Metric Tubing
Product/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, 110 or 130 Only, Metric Tubing Option
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, 110 or 130 Only, Metric Tubing Option
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
OA6015
Full Air Suspension Kit
Product/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, Contact for further info. No offset Front shock tower
- Standard to 50mm Raised, incl. Shock relocation mounts, Compatible with standard Air Control kits, excl. Intelliride, Long travel shock options available, contact Airbag Man for further details
Fitment Position: Front Axle
Fitment Time: 180 minutes
Availability: Currently replenishing stock levels, "Request Quote" for availability.
Please note: The quickest way to enquire about ETA is to click "Request Quote" and fill out the Request a Quote form.
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, Contact for further info. No offset Front shock tower
- Standard to 50mm Raised, incl. Shock relocation mounts, Compatible with standard Air Control kits, excl. Intelliride, Long travel shock options available, contact Airbag Man for further details
OA6015M
Full Air Suspension Kit- Metric Tubing
Product/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, No offset Front shock tower, Metric Tubing Option
- Standard to 50mm raised front, incl. Shock relocation mounts, Long travel shock options available, Compatible with Intelliride control systems, Contact Airbag Man for further details
Fitment Position: Front Axle
Fitment Time: 180 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, No offset Front shock tower, Metric Tubing Option
- Standard to 50mm raised front, incl. Shock relocation mounts, Long travel shock options available, Compatible with Intelliride control systems, Contact Airbag Man for further details
OA6515M
Full Air Suspension Kit- Metric Tubing
Product/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, Metric Tubing Option
- Coil springs replaced with sleeve style airbags to allow full height adjustment, IntelliRide on-board 4 corner air controls included.
Fitment Position: Front and Rear
Fitment Time: Contact Airbag Man to confirm
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, Metric Tubing Option
- Coil springs replaced with sleeve style airbags to allow full height adjustment, IntelliRide on-board 4 corner air controls included.
CR5028
Air Suspension Helper Kit for Coil Springs
Product/Vehicle Details:
- Rear Height Measurement up to 170mm, see note for measuring information
- To check height measure from bottom of bump stop to axle housing, then choose the matching kit - jack car up before measuring if it is lower than desired, for more information contact Airbag Man.
- Easy Fit Kit
- Use kit for Hub to Guard measurement (where possible), up to 570mm at driving height
- Inner coil needs to be removed on 130's
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Easy Fit Kit
- Inner coil needs to be removed on 130's
CR5028HP
Air Suspension Helper Kit for Coil Springs- High Pressure
Product/Vehicle Details:
- Rear Height Measurement up to 170mm, see note for measuring information
- To check height measure from bottom of bump stop to axle housing, then choose the matching kit - jack car up before measuring if it is lower than desired, for more information contact Airbag Man.
- Easy Fit Kit
- High Pressure Kit, use kit for Hub to Guard measurement (where possible), up to 570mm at driving height
- Inner coil needs to be removed on 130's
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Easy Fit Kit
- High Pressure Kit
- Inner coil needs to be removed on 130's
CR5157
Air Suspension Helper Kit for Coil Springs
Product/Vehicle Details:
- Rear Height Measurement 195mm or more, see note for measuring information
- To check height measure from bottom of bump stop to axle housing, then choose the matching kit - jack car up before measuring if it is lower than desired, for more information contact Airbag Man.
- Easy Fit Kit
- Use kit for Hub to Guard measurement (where possible), of 595mm or more at driving height
- Inner coil needs to be removed on 130's
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Rear Height Measurement 195mm or more, see note for measuring information
- To check height measure from bottom of bump stop to axle housing, then choose the matching kit - jack car up before measuring if it is lower than desired, for more information contact Airbag Man.
- Easy Fit Kit
- Use kit for Hub to Guard measurement (where possible), of 595mm or more at driving height
- Inner coil needs to be removed on 130's
CR5157HP
Air Suspension Helper Kit for Coil Springs- High Pressure
Product/Vehicle Details:
- Rear Height Measurement 195mm or more, see note for measuring information
- To check height measure from bottom of bump stop to axle housing, then choose the matching kit - jack car up before measuring if it is lower than desired, for more information contact Airbag Man.
- Easy Fit Kit
- High Pressure Kit, use kit for Hub to Guard measurement (where possible), of 595mm or more at driving height
- Inner coil needs to be removed on 130's
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Rear Height Measurement 195mm or more, see note for measuring information
- To check height measure from bottom of bump stop to axle housing, then choose the matching kit - jack car up before measuring if it is lower than desired, for more information contact Airbag Man.
- Easy Fit Kit
- High Pressure Kit, use kit for Hub to Guard measurement (where possible), of 595mm or more at driving height
- Inner coil needs to be removed on 130's
OA4515
Full Air Suspension Kit
Product/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- Use with 0-50mm Raised Front springs or airbags, 110 or 130 Only
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, 110 or 130 Only
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
OA4515M
Full Air Suspension Kit- Metric Tubing
Product/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- Use with 0-50mm Raised Front springs or airbags, 110 or 130 Only, Metric Tubing Option
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended. Note that this kit will lift the rear height slightly above standard, or maintain standard height to match a lifted front end.
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, 110 or 130 Only, Metric Tubing Option
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
SAR610380
Airbag Man Rear Shock Absorber
Product/Vehicle Details:
- Sold as a pair
- Suitable for a 50mm lift
- Suits Factory shock mounting position
Fitment Position: Rear Axle
Fitment Time: 90 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Sold as a pair
- Suitable for a 50mm lift
- Suits Factory shock mounting position
OA6015
Full Air Suspension Kit
Product/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, Contact for further info. No offset Front shock tower
- Standard to 50mm Raised, incl. Shock relocation mounts, Compatible with standard Air Control kits, excl. Intelliride, Long travel shock options available, contact Airbag Man for further details
Fitment Position: Front Axle
Fitment Time: 180 minutes
Availability: Currently replenishing stock levels, "Request Quote" for availability.
Please note: The quickest way to enquire about ETA is to click "Request Quote" and fill out the Request a Quote form.
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, Contact for further info. No offset Front shock tower
- Standard to 50mm Raised, incl. Shock relocation mounts, Compatible with standard Air Control kits, excl. Intelliride, Long travel shock options available, contact Airbag Man for further details
OA6015M
Full Air Suspension Kit- Metric Tubing
Product/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, No offset Front shock tower, Metric Tubing Option
- Standard to 50mm raised front, incl. Shock relocation mounts, Long travel shock options available, Compatible with Intelliride control systems, Contact Airbag Man for further details
Fitment Position: Front Axle
Fitment Time: 180 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, No offset Front shock tower, Metric Tubing Option
- Standard to 50mm raised front, incl. Shock relocation mounts, Long travel shock options available, Compatible with Intelliride control systems, Contact Airbag Man for further details
SAF570360
Airbag Man Front Shock Absorber
Product/Vehicle Details:
- Sold as a pair
- Suitable for a 50mm lift
- Suits Airbag Man shock mounting position
Fitment Position: Front Axle
Fitment Time: 90 minutes
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Sold as a pair
- Suitable for a 50mm lift
- Suits Airbag Man shock mounting position
OA6515M
Full Air Suspension Kit- Metric Tubing
Product/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, Metric Tubing Option
- Coil springs replaced with sleeve style airbags to allow full height adjustment, IntelliRide on-board 4 corner air controls included.
Fitment Position: Front and Rear
Fitment Time: Contact Airbag Man to confirm
Availability: In Stock
View Product
View Resources
Air bag suspension for LAND ROVER DEFENDER 110 & 130 Utes 90-16
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- 0-50mm Raised, Metric Tubing Option
- Coil springs replaced with sleeve style airbags to allow full height adjustment, IntelliRide on-board 4 corner air controls included.
No products found. Reset Filters